Fsp-5000-rps programming manual

This operation guide contains important information and notes on operating the FPA-5000/ FPA-1200. Using the step-by-step directions, you can familiarize yourself with the individual functions: - In overview, page 19 provides an overview of the operating and display elements and the touch screen. • The FSP-5000-RPS programming software enables adaption to project- and country-specific requirements. The programming software and the associated documentation can be found at boschsecurity.com for those with access rights. Information about the programming software is also included in FSP-5000-RPS online help. Parts included • Each element and input which, after the programming, is able to set off an alarm requires a detection point. Inputs are considered as detection points if they are programmed accordingly in the FSP‑5000‑RPS Programming Software. • Detection points are required for:-manual call points and automatic detectors-inputs of LSN elements • The FSP-5000-RPS programming software enables adaption to project- and country-specific requirements. The programming software and the associated documentation can be found at boschsecurity.com for those with access rights. Information about the programming software is also included in FSP-5000-RPS online help. Turn on the fire panel. 2. Connect the laptop on which the FSP-5000-RPS programming software is installed to the fire panel. 3. Load the configuration. FPA 5000 Installation Manual EnUS 1218442507 - Free ebook download as PDF File (.pdf), Text File (.txt) or read book online for free. Manual de instalación de panel . The FSP-5000-RPS programming software enables adaptation to country-specific circumstances. Figure 2.3: Overview of MPC system. Position. It is highly recommended to use the latest version of Remote Programming Software (RPS) with the G Series Panel available from au.boschsecurity.com. You will also need a D5370-USB Key. DEFAULT Master PIN (User 1) = 123456 DEFAULT INSTALLER PIN (User 0) = 123 To ENTER programming = CODE (123) then select [ENTER] To EXIT programming = Hold down Free download bosch fsp-5000-rps software download software at UpdateStar - 1,746,000 recognized programs download bosch fsp-5000-rps software. Related searches » bosch fsp-5000-rps » fsp-5000-rps.update bosch » software fsp-5000-rps » fsp-5000-rps programming software » fsp-5000-rps download » bosch rps fsp-5000 download » fsp-5000 Inputs are considered as detection points if they are programmed accordingly using the FSP-5000-RPS Programming Software. - In accordance with EN 54-2, no more than 512 detectors and their functions may fail if a system component fails. - 12 V/45 Ah batteries can only be used with the frame installation housings. The entire fire detection system is configured via a laptop using the new programming software FSP-5000-RPS. Thanks to the external CAN bus interface, several Panel Controllers and Remote Keypads can be interconnected. Using either a loop structure or bus structure, the network adapts to every application conditions. Fpa 5000 Installation Manual Enus 1218442507 [d47exm5012n2]. Fpa 5000 Installation Manual Enus 1218442507 [d47exm5012n2]. The range consists of models with swivel, with manual and automatic addressing, and models without swivels with automatic steering setting. Sensor technology and signal processing. Individual sensors can be configured in the FSP-5000-RPS programming software.