Hpe 3par os 3.2.2 mu6 upgrade instructions

View 3par_rmc_6x-compatibilitymatrix.pdf from AA 1HPE Data Availability, Protection and Retention Compatibility Matrix -Recovery Manager Central Jun 25, 2019 Hewlett Packard Enterprise - Recovery HPE 3PAR 8450 Upgrade Node Pair with All-inclusive Single-system Software. H6Z19B · H6Z06B is used to upgrade a HPE 3PAR StoreServ 8400 2-node Storage Base into a 4-node configuration. · H6Z08B is used to upgrade a HPE 3PAR StoreServ 8440 2-node Storage Base into a 4-node configuration. · H6Z19B is used to upgrade a HPE 3PAR StoreServ 8450 2 When multiple patches are listed for a minimum 3PAR OS version:•"or" means that the highest-numbered patch supersedes the lower-numbered patch (or patches). HPE recommends installing the highest-numberedpatch to ensure the latest firmware is installed.•"+" means that the combination of patches supersedes the lower-numbered patch (or patches). HPE 3PAR Service Processor Software 5.0.6 is released. This version has now support for 3.2.2 MU4, EMU4 and MU6, means you can use the new SP 5.0.6 with this 3.2.2 OS Versions. No need for Updating HPE 3PAR versions : HPE 3PAR OS (StoreServ 7000) 3.2.2+MU6+P96+P99 (all patches and MUs) CLI Server: 3.2.2.709 3.2.2.709 (MU6) (all patches and MUs) HPE 3PAR SNMP Agent (StoreServ 7000) component is not included in the HPE OEM VMware custom image and must be downloaded from the VMware Compatibility Guide HPE 3PAR Operating System Software. The HPE 3PAR Operating System Software Suite gives you everything you need to get up and running quickly and efficiently. It is the foundation software of HPE 3PAR StoreServ Storage, combining advanced virtualization capabilities with simple storage management, high efficiency, and world class performance. Enabling VMware Integration on SP 4.4 (MU7) 3PAR Service Processor 4.4 (MU7) 1. Select SPmaint from the Main Menu 2. Select StoreServ Configuration Management 3. Select Add StoreServ 4. Select Add vCenter 5. Configure one or more vCenterinstances that hosts VMs on 3PAR StoreServ OS 3.2.2 MU4/MU6 6. Click Add to save the vCenterconfiguration The array OS and CLI tools are at version 3.2.2 MU6 In our case this is using the 3PAR VSS provider, the user guide for the the installation of the latest version states the following: Before installing HPE 3PAR VSS Provider for Microsoft Windows, the host server must have the 3PARCLI installed and configured. I think you are using 3PAR 8200 with Inform OS 3.2.2 MU6 and that's why you still see wsapi version 1.5.3. If you update your Inform OS version to 3.3.1 MU3 then your wsapi version will get updated to version 1.6.3. Below is an example of 3.3.1 MU3 system where wsapi version 1.6.3. XXXXX cli% showversion Release version 3.3.1 (MU3) • Install all OS patches in the same sequence as they are released unless instructed otherwise. • Install all available and applicable patches before installing this patch. • Stage the latest Upgrade Tool prior to installing this patch. The Upgrade Tools enable 3PAR OS updates and do not a ectstorage system operation outside of the upgrade process. Select SPmaint from the Main Menu and choose Option 3 "StoreServ Configuration Management" Choose "Add StoreServ" then "Add vCenter" Supply the required information and click add. The account supplied needs to have read only access to the vCentre RDA transport mode If you got this Message: Recently I upgraded a new 3PAR from 3.2.2 MU