Charity Golf Network

Your source for information about hosting a charity golf tournament.

Hunter sprinkler head manual

 

 

HUNTER SPRINKLER HEAD MANUAL >> DOWNLOAD LINK

 


HUNTER SPRINKLER HEAD MANUAL >> READ ONLINE

 

 

 

 

 

 

 

 











 

 

Eliot Chaffee from Ewing Irrigation demonstrates how to adjust a Hunter rotary sprinkler head using the PGP model. The process is similar for the I series mo Instagram | instagram.com/old_car_alley/Had to replace one of the sprinkler heads in dad's yard a couple weeks ago, so I did a very short video o If you would like us to add a particular manual please let us know and we will respond as soon as we can. CONTACT US. Hunter ICC Controler. Hunter ICR Remote. Hunter PRO-C 400. Hunter Hydrawise hpc. Hunter PRO-C Controller. Intermatic 8845. Intermatic 8816. The Hunter Flush Plug is a new innovative design that positively keeps muddy water and debris from entering back into the spray head after fl ushing is complete. It is designed to open as the stem extends upward and completely close when the stem is in the retracted position. Seal grips riser at top and bottom—eliminating wasteful fl ow-by Insert the plastic key end of the Hunter wrench into the adjustment socket (Fig. 3 & 4). 2. While holding the nozzle turret at the right stop, turn the wrench counterclockwise. Each full 360˚ turn of the wrench will decrease the arc 90˚. 3. Adjust to any arc between 50˚ and 360˚ (Fig. 5). 4. To Increase The Arc: 1. Insert the plastic key end of the Hunter wrench ( click here to purchase) into the adjustment socket on the rotor head. 2. While holding the nozzle turret at the right stop, turn the wrench clockwise. Each full 360° turn of the wrench will increase the arc 90°. 3. At first, check if the sprinkler turns on manually but not automatically. If so, it might not be programmed properly. We're providing the step-by-step procedure to turn on properly a Hunter sprinkler system below. Just match your steps with it. Check The Current Time The monitor at the top left shows time. Adjustable heads are preset to approximately 180˚. Sprinklers may be adjusted with water on or off. It is recommended that initial adjustments be made before installation. All Hunter sprinklers are available with a factory-installed drain check valve. The drain check valve prevents low-head drainage with elevation changes up to 10'. To The manual covers the installation, maintenance, and troubleshooting of a Hunter Pro C sprinkler system. The Hunter Pro C sprinkler system is an advanced controller for residential lawns which has many features such as a wireless connection and rain delay mode. You can download the manual by clicking here. Hello Everyone! Don't have the Rain Bird 5000 Rotor Sprinkler Head but something similar? Chances are you have the Hunter PGP Sprinkler Head. Good news! I'VE RECEIVED FEEDBACK FROM HUNTER INDUSTRIES!!!"Hello Robert Thank you for your idea submission on Hunter's Open Innovation site. We welcome ideas from our Insert the plastic key end of the Hunter wrench into the lifting socket of the sprinkler and turn 90°. Pull the riser up to gain access to the nozzle socket (Fig. 8). 2. Using the hex key of the Hunter wrench, turn the radius adjustment screw (Fig. 6) counterclockwise to make sure it is not blocking the nozzle socket opening. Insert the plastic key end of the Hunter wrench into the lifting socket of the sprinkler and turn 90°. Pull the riser up to gain access to the nozzle socket (Fig. 8). 2. Using the hex key of the Hunter wrench, turn the radius adjustment screw (Fig. 6) counterclockwise to make sure it is not blocking the nozzle socket opening.

MySpace

Facebook

Comment

You need to be a member of Charity Golf Network to add comments!

Join Charity Golf Network

© 2024   Created by Tom King.   Powered by

Badges  |  Report an Issue  |  Terms of Service