Ideal logic plume kit installation

Installation instructions for the plume management kit. The opening of the ginnel should be considered an opening into the building and thus the terminal should be sited at least 300mm above or 600mm beyond the opening (See Fig. 1). If more than one plume management kit is used within the same ginnel, the plume management terminals must be filexlib. ideal logic manual ideal logic plume kit installation instructions ideal logic flue extension 2mideal logic horizontal flue ideal logic flue extension . The Logic + Combi range of boilers are wall mounted, full sequence, automatic spark ignition, low water content, fanned flue, high efficiency, condensing, This kit is suitable only for the Flue trim finishing system for use with horizontal flue terminations on boilers from Ideal and suitable for use with Ideal Logic, Logic+, Code ES, and Combi ES boilers. This High Level Flue kit allows the boiler flue outlet to be externally extended vertically to ensure the flue product exit from the boiler is at a high level to overcome the problems associated with plume emission. Evomax 2 features updated controls including a new cascade control option and a built in non-return valve within its evolved aesthetic design. It also has improved access for even easier maintenance and a lift weight reduced by up to 10%. Accompanying Evomax 2 are new Brazed Plate Heat Exchangers, designed especially for multiple boiler cascades.
The Logic + Combi range of boilers are wall mounted, full sequence, automatic spark ignition, low water content, fanned flue, high efficiency, condensing, This kit is suitable only for the domestic gas boilers listed below : These instructions must be read in conjunction with the Installation and Servicingweather compensation and OpenTherm controls.
boiler is at a high level to overcome the problems associated with plume emission. 1 unpackIng a. Cutting aid 60/100 These Installation Instructions - 1 off Logic + Heat 30 .. G.C. No. 47-750-22 Logic System 15 5 HIgH lEvEl FluE outlEt kIt FIttIng Refer to the boiler installation and servicing instructions for
Logic Heat Installation Manual - FREE BOILER MANUALS
This high level plume kit for Ideal Logic and Vogue boiler models is suitable for use to divert harmful flue gas (plume) away from a window, alleyway or neighbours property to a safe place. The kit contains: Flue elbow - 1 off 60mm flue exit elbow - 1 off 60mm horizontal flue exit - 1 off 60mm x 500mm flue outlet Extension pipe - 1 off
Introduction Welcome to the Ideal Touch Connect installation guide. This guide is designed to lead you through a straight forward installation and setup. It is advisable to read through all steps before starting the installation. User guide, Quick Start guide and FAQs can be found at idealboilers.com. Page 5: Ideal Touch Kit Contents

Ideal logic plume kit installation kezikonyv
Ideal logic plume kit installation pdf
Ideal logic plume kit installation manuaalinen
Ideal logic plume kit installation bedienungsanleitung
Ideal logic plume kit installation met de hand