Loksound manual

The Siemens Charger is a family of diesel-electric passenger locomotives designed and manufactured by Siemens Mobility for the North American market. There are four models of Chargers: the SC-44 for state-supported inter-city services, the SCB-40 for Brightline inter-city service, the SC-42 for VIA corridor service, and the ALC-42 for Amtrak LokSound (V4.0) (Select) decoders support full manual notching capability for Diesel / Electric sound projects beginning at LokProgrammer Software version 4.3.0 and beyond. Sound projects created with previous versions of the software are updated to manual notching capability when opened and a ˜rmware update is preformed on the decoder. LokSound By ESU Speaker for LokSound XL V3.5 and 4.0 Decoders -- 5/8 x 1-3/8" 16 x 35mm 2W 397-50325 LokSound is the brand name for ESU's line of sound-equipped multifunction decoders. ESU's LokSound multifunction decoders are very advanced sound decoders, and are found as the OEM multifunction decoder in many locomotives. For reference, LokSound Manual at Rapido website. Further Reading External Links. ESU decoders LokSound 73199, 73100 In order to achieve this, Loksound 5 decoders are equipped with a more powerful 32 bit processor and have a sound resolution of 16 Bit and a sampling frequency of 31,250 Hz. This means clean, crisp, prototypical sounds across all 10 channels. Another important improvement over Loksound 5's predecessors is the significant increase in function user manual LokSound / LokSoundXL V3.5, 1st edition, 07/2005 3 1. Introduction Congratulations on purchasing a LokSound decoder. With LokSound your engines will sound like the prototype. You will soon notice that your LokSound equipped engines are in the center of attention on any The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC Decoder, which supports RailComPlus and can also be used on DC layouts. Technische Daten. Betrieb unter DCC mit RailComPlus®, M4, Motorola® und Selectrix®. 32 Funktionen schaltbar (abhängig von der Zentrale) 32-Bit-Prozessor. ESU LokSound Manual Notching. Here is a demonstration of the newest feature that has been incorporated into the ESU decoder line, Manual Notching. This is a really cool effect that allows you, the engineer, to control the RPM of the engine (sound effect) independent of the speed of the locomotive. The effect is controlled by two function ESU 51955 will accept a Micro Next18 decoder. 54898 Next18 decoder plugs to 51955 board. Conversely, the Select sound files are closed. You cannot access or edit the sound file flow chart in a LokSound Select sound decoder. Otherwise, Select files are identical to a V4.0 sound file. You can edit any CV for motor control, function mapping, sound Please go to LokSound.com for a complete user manual Technical data LokSound Select Decoder NMRA/DCC with 14, 28, 128 speed steps 2-digit (short) or 4-digit (long) addresses Analog DC (Dual mode, de-selectable) Automatic recognition of operational mode Power: Runs all DC and coreless motors Silent, safe 31,25 kHz pulse width frequency BEMF Long address of the loco Long address of engine ( see full manual online at loksound.com) 19 Consist Address Additional address for consist operation. Value 0 or 128 means: consist (For LokSound 5 Multiprotocol decoders only) 0 - 255 150 134 ABC-Mode „Sensibility" Threshold, from which asymmentry on ABC shall be recognised. 4 - 32 12 Long address of the loco Long address of engine ( see full manual online at loksound.co