Ocean view installation and operation manual

California Institute of Technology 2021 INSTALL & OPERATION MANUAL 3 1 Installation Checklist 1. Decide on light spacing - OceanLED recommendations available. Rear of lights must never be exposed to wet environments inside the hull. 2. Decide on light angles (only applies for E7 installs)- OceanLED Personalised Service available on request. 3. Installation methods method one 1. Visit the PIX installation link to log in to the store: If there are two Oceanpayment credit card channels at the same time, you need to disable the old mode credit card. If you are not sure how to choose, please consult the corresponding operation support. Ocean Optics QE Pro High-Sensitivity Fiber Optic Spectrometer. The QE Pro features a Hamamatsu low-etaloning, back-thinned FFT-CCD detector with a 2-D arrangement of pixels (1044 horizontal x 64 vertical) that is responsive from 200-1100 nm and has a peak quantum efficiency of ~90% (with a QE of 65% at 250 nm). 2021 INSTALL & OPERATION MANUAL 11 4 Operation / Maintenance 4.1 OPERATION When power is applied to the camera, the video output should be active. Note that when using an HD-SDI to HDMI converter, there may be a small delay on power on while the system locks to the HD-SDI signal. 4.2 MAINTENANCE Ocean Data View (ODV) Manual V1.0 Prepared by the Coastal and Regional Oceanography Lab Ocean Data View (ODV) is a program designed for the interactive graphical display of Latest Version and then select the adequate operating system (Linux, Mac or Windows). Download the file (odv_4.7.6_w64.exe for example for Windows), and start If there are two Oceanpayment credit card channels at the same time, you need to disable the old mode credit card. If you are not sure how to choose, please consult the corresponding operation support. It contains all Ocean Optics software and manuals for operating our software, spectrometers, and spectroscopic accessories. All manuals and operating instructions on the CD are in Portable Document Format (PDF), which means that you need to have Adobe Acrobat Reader to view them. We have included Adobe Acrobat Reader 4.0 on the CD and we INSTALLATION AND OPERATION MANUAL INSTALL GUIDE X Series X4 / X8 / X16 Product kit includes: X Light / Bezel / Screws / Fuse Kit OceanLED INSTALL / X SERIES / 130217 / v7.2 OceanLED reserve the right to change this document without notice. Please refer to oceanled.com for latest documentation. Configuration Information. 1. According to the content of the e-mail, fill in the following order Terminal 、 SecureCode 、 Methods Code （ If it is a credit card, Methods Code: it is blank by default. In case of local payment installation， Methods Code: Please contact operations support to confirm filling. ）,Save. Configuration Information. 1. According to the content of the e-mail, fill in the following order Terminal 、 SecureCode 、 Methods Code （ If it is a credit card, Methods Code: it is blank by default. In case of local payment installation， Methods Code: Please contact operations support to confirm filling. ）,Save. Installation and Operation Manual Document Number 000-10000-030-02-0606 Offices: Ocean Optics, Inc. 830 Douglas Ave., Dunedin, FL, USA 34698 recording, or otherwise, without written permission from Ocean Optics, Inc. This manual is sold as part of an order and subject to the condition that it shall not, by way of trade or otherwise, be lent Then, navig