Rohde & schwarz fsv service manual

Version 13.00, May 2019 Rohde & Schwarz R&S®FSV Signal and Spectrum Analyzer 3 Definitions General Product data applies under the following conditions: Three hours storage at ambient temperature followed by 30 minutes warm-up operation Specified environmental conditions met Recommended calibration interval adhered to All internal automatic adjustments performed, if applicable Rohde & Schwarz Rohde & Schwarz R&S®FSV3000 Signal and Spectrum Analyzer 5 Spectral purity SSB phase noise (1 Hz), without R&S®FSV3-B710 option frequency = 1 GHz, carrier offset 100 Hz < -91 dBc 1 kHz < -101 dBc 10 kHz < -107 dBc 100 kHz < -115 dBc 1 MHz < -135 dBc 10 MHz -150 dBc (nom.) SSB phase noise (1 Hz), Microsoft 1.1.3 Service Manual Describes the performance test for checking the rated specifications, module replace-ment and repair, firmware update, troubleshooting and fault elimination, and contains mechanical drawings and spare part lists. The service manual is available for registered users on the global Rohde & Schwarz This manual applies to the following R&S®FSV3000 and R&S®FSVA3000 models with firmware version 1.70 and higher: R&S ® FSV3004 (1330.5000K04) / R&S FSVA3004 (1330.5000K05) 7.5 GHz Spectrum Analyzer, Type N (f) Rent or Lease Get Quote. Rohde & Schwarz - FSV3007. Measurements at the push of a button, capturing rare events with event based actions and simple script programming with the SCPI recorder - setting up complex measurements in no time is the strength of the R&S®FSV3000 signal and spectrum analyzer. Its 3.6 GHz Spectrum Analyzer, Type N (f) Rent or Lease Get Quote. Key Facts: * Frequency range 9kHz to 3.6GHz * 40 MHz analysis bandwidth * 0.4 dB level measurement uncertainty up to 7 GHz * Measurement applications for GSM/EDGE (including EDGE Evo), WCDMA/HSPA , LTE, WiMAX, WLAN, vector signal analysis, analog modulations * Easy on-site upgrading