Sinamics g150 commissioning manual

sinamics g150 is as straightforward as it gets commissioning: finished quickly - manual sinamics gm150 without a manual a sinamics g150 is commissioned direct- ly at the aop30 user- friendly operator panel or the starter software. e86060- k5512- a101- a3- 7600. sinamics g150 version a and c operating instructions user documentation valid for Siemens SINAMICS G120 CU240B-2 Manual Online: Basic Commissioning. Table 4- 3 Menu Inverter with CU240B-2 and CU240E-2 Control Units Operating Instructions, 07/2010, FW 4.3.2, A5E02299792B AA Set the parameters of this menu one after the other: Remark In the BOP-2, select the menu 3.4 Power Module. Important data on the Power Modules is provided in this section. Further information is contained in the Hardware Installation Manual of the Power Module. Overview of the manuals (Page 573) All power data refers to rated values or to power for operation with low overload (LO). The LCI-converter (load commutated inverter), SINAMICS GL150, is designed for single-motor applications with variable and constant torque characteristics in power ratings up to 85 MW (Higher ratings on request). Available in air- and water-cooled designs and capable of 2Q or 4Q operation. SINAMICS G120D SINAMICS G130/G150 SINAMICS S120 SINAMICS S150 SINAMICS for simple planning and engineering STARTER - for fast commissioning, optimization and diagnostics. 3 Medium-voltage drives from Siemens: The reliable and complete range manual operations without requiring any special tools. This is all complemented SINAMICS G150 is as straightforward as it gets Commissioning: Finished quickly - without a manual A SINAMICS G150 is commissioned direct- ly at the AOP30 user-friendly operator panel or the STARTER software. Commis- sioning is extremely simple and can be quickly learned. Only a few parameters have to be set during the menu-prompted common to all SINAMICS enclosed drives. The AOP30 is mounted in the enclosure door of the G150 drive, and is used for start-up/commissioning or operation and troubleshooting of the drive. During the first start-up of the drive, the user will automatically be guided through the initial start-up procedure that allows sinamics s150 manual SINAMICS S150 Сabinet unit 2/10 eltra-trade.com info@eltra-trade.com +421 552 601 099 Siemens Sinamics S150in cabinet format are converting systems designed for variable-speed drives and especially suitable for inverters with high dynamics requirements or converters with frequently braking cycles. SINAMICS G130 / G150 (DR-G130) Objectives understanding the Engineering concepts, commissioning steps and fault diagnostics in the Drive Target Group Users, Commissioning / Service /Maintenance Engineers Various options to go line with G130/G150 system Automatic/Manual System Configuration with Starter Start-Up for Open Loop V/f Control SINAMICS - Low Voltage Engineering Manual SINAMICS G130, G150, S120 Chassis, S120 Cabinet Modules, S150 Version 4.0 x May 2008 SINAMICS Drives s The base is always colored RAL 7022 (umbra grey). A special color is not possible. Enclosure with option M06 Siemens D11.7 (Part 1) - 2013 3/9 3 SINAMICS G150 NEMA Type C enclosed chassis Description of options M07 Base (plinth) 8" (200 mm) high The 8" enclosure base provides more space for bending and routing cables. SINAMICS GM150 and SINAMICS SM150 converters represent the expansion of the SINAMICS drive family in the medium voltage range. They