Spirax sarco steam trap installation guide

spirax sarco steam trap catalog pdf
steam flow measurement using orifice
steam engineering
learn steamsteam piping best practices
steam basics
understanding steam
spirax sarco steam traps

The TD42L and TD42H are maintainable thermodynamic steam traps with integral strainer. INSTALLATION AND MAINTENANCE INSTRUCTIONS. IM-2-502-US. INSTALLATION AND. MAINTENANCE INSTRUCTIONS. February 1995. IMI 2.0001. TSS 300 THERMOSTATIC. STEAM TRAPS. Maximum Working Conditions. 0 to 300 psi at 421°F. MAINTENANCE INSTRUCTIONS. September 2009. IM-2-516-US. THERMO-DYNAMIC®. STEAM TRAPS The only wearing parts of Thermodynamic traps are (A). A simple but effective method of drying wet steam is to install a separator upstream of the flowmeter. Entrained moisture impinges on the baffle plates and the Thermostatic steam traps sense the temperature difference flow; keep trap outlet free of any piping. INSTALLATION AND MAINTENANCE INSTRUCTIONS.INSTALLATION NOTES: 1. Install strainer (20 mesh screen) and gate type shutoff valve upstream of trap. Optional Internal. Strainer available Referring to the Installation and Maintenance Instructions, Spirax Sarco Float & Thermostatic Steam Traps are ideally suited for most HVAC and process LOSS OF GUARANTEE. Total or partial disregard of above instructions involves loss of any rights to guarantee. 3.343.5275.203 Issue 5 - 2013.09. Spirax-Sarco III) Determine the correct installation situation and direction of fluid flow. IV) Spirax Sarco products are not intended to withstand external stresses that GKC ball float steam traps. Installation and Maintenance Instructions. 1. Safety information. 2. General product information. 3. Installation.