Systec it1 technical manual

IT1 Ex2/22 Universal Weighing Terminal, W&M Approved, for Industrial Use for Installation in Hazardous Area Zones 2 and 22. IT1 Ex2/22 - Technical Data SysTec Systemtechnik und Industrieautomation GmbH Tel. +49 (0) 2238 - 9663-0 - systecnet.com Subject to change without notice IT1 Differencies to IT1000 Standard features: Bright 4.3" TFT color display, 2 lines with softkeys Simultaneous display of tare weight together with gross or net weight 10,000 divisions W&M approved (instead of 6000 so far) with analog loadcells SIM and PIM socket can be used at the same time Date / time function always available Systec GmbH is a manufacturer of laboratory sterilizers, autoclaves (steam sterilizers), media preparators and dispensing devices for liquid media and microbiological culture media. Systec develops and manufactures, certified according to ISO 9001 and ISO 14001, a wide range of products for the modern laboratory, science and research as well as SYSTEC IT1 EX 2/22 INDICATOR Can be approved for trade use Optional alibi memory for internal storage of 1,000,000 weights in approved data archive Robust IP65 stainless steel ATEX rated approved industrial indicator 110mm TFT Display Approved up to 10,000 divisions Mains 110-240 VAC, 12-30 VDC or external battery versions available Date & time. IT1 Remote Display - Technical Data SysTec Systemtechnik und Industrieautomation GmbH Tel. +49 (0) 2238 - 9663-0 - systecnet.com Subject to change without notice ST.2309.1884 IT1_FAZ_DBE.PDF 06.2017 Sales and service Directives: Standards: EC: Test Certificate as remote display (pending) 2014/31/EU, 2014/30/EU, 2014/35/EU EN 45501, OIML danvaegt.dk IT1 connects to one scale with analog strain gauge load cells, entry impedance 43 Ω to 3.3 kΩ (for example suitable for 8 x 350 Ω load cells), or via zener barriers, entry impedance 87.5 Ω to 3.3 kΩ (for example suitable for 4 x 350 Ω load cells), or digital load cells. The weighing terminal provides a W&M approved resolution of up to 10000 d. SYSTEC develops software using various different approaches. Most solutions are created with the aid of the LabVIEW software engineering platform developed by National Instruments. This platform can be used to perform even highly complex tasks within a short period. When creating new solutions, SYSTEC uses LabVIEW-based application frameworks The production and development site for SysTec weighing terminals and software solutions is Germany (ISO 9001:2015 certified just-in-time production). Distribution and service is maintained through a world-wide network of qualified scale manufacturers and system integrators. The company is located in Bergheim-Glessen, near Cologne. IT1 - Technical Data SysTec Systemtechnik und Industrieautomation GmbH Tel. +49 (0) 2238 - 9663-0 - systecnet.com Subject to change without notice ST.2309.1753 IT1_DBE.PDF 08.2017 Sales and service Directives: Standards: 2014/31/EU, 2014/30/EU, 2014/35/EU EN 45501, OIML R76-1, Brugermanual SYSTEC IT 1000 Brugermanual SYSTEC IT 1000 Indledning: Tillykke med valget af et kvalitetsprodukt fra Dansk Vægt Industri. De er nu i besiddelse af et produkt som ved korrekt brug kan holde i mange år. Skulle De få problemer med produktet, kan De kontakte vores serviceafdeling på tlf. 86521411. Produktbeskrivelse: Model: SysTec IT1 - Stainless Steel Available on a wall-mount, desk-mount and panel-mount. Desktop/wall-mount version. Suitable for desktop or wall-mount installation; Stainless steel